How to Clean Your Washing Machine Filter: Simple Steps


Most clothes washers will have a filter, typically hidden behind a board on the facade of the machine. The channel is intended to get build-up, hair, and tiny things that may have made it into the wash unintentionally, like spare change or hair clips. On the off chance that the lint becomes stopped up, it can prevent the machine from cleaning successfully, so you should check and clean the filter once in 3 months. Literally how you should operate and remove the filter will differ from machine to machine. Hence, check the guidance in the manual carefully before cleaning. Once you detach the filter, wash a filter with clean water and wipe it with a wet cloth before putting it back into place.

When you plan cleaning of washing machine, especially, when you planning to clean the filter, need to take extra care in the process.


Why do we need to clean the washing machine filter?

If you find your clothes are soaking wet after the final spin. then the reason could be the problem with your filter, checking and cleaning your washing machine filter is a quick and easy process. By finding and removing your filter, cleaning it, by cleaning your washing filter, it helps to increase the life of the filter and you can save a big amount in terms of maintenance and replacement filter cost. Washing machine filters should be cleaned every 3-4 months.

Here is the easy steps for washing machine filter Cleaning. 1

Step 1. Locating and removing the filter

1. Turn off and unplug your washing machine.
2. Find the washing machine filter is located.
3. Remove the filter cover.
4. Take out the filter.

Step 2. Cleaning of filter

Clean the filter wisely, avoid damage.
Read your washing machine manual for reference.

Step 3. Use a paper towel to remove ant lint from the filter

If the layer of lint is on the thicker side, Use a small brush, such as an old toothbrush, to remove the debris.

Step 4. Remove the screen from the filter, soak for 10 minutes in hot water

Remove the lint screen, take it off and place it in a bowl of hot tap water.
Allowing it to soak will remove any lingering lint, fabric softener, or detergent.

Step 5. Inspect the inside of the machine for excess lint.

Before placing to back filter check any lint available in filter place.
If any clean by towel it lintfree.

Step 5. Replace the filter and outer cover

After cleaning, place the filter back in your washing machine. Ensure the connecting back to drainage hose and outer cover.

Step 6. Run an empty washer for test leak

Ensure any leakage in the filter, Run an empty washer before resuming your laundry work.

Step 7. Prolonging the life of your washing machine filter

1. Clean your filter at least 4 times a year.
2. Identify problems right when they occur.
3. Wipe the door seal out after every use.

The bottom line

Cleaning your washing machine filter means reducing the cost of maintenance and avoiding unwanted downtime of your laundry. it’s better to take these easy steps to make a happy life with laundry work. With this guide, you can clean your washing machine filter at your home without hustle-free.

Read also: how to clean washing machine

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top